User's Guide

Mio LINK User Guide 04
Activating Your Mio LINK
1. Remove your Mio LINK from the packaging.
2. Press and hold the button to activate Mio LINK. The LED will light up.
3. After a few seconds, the LED light will turn off.
4. Mio LINK is now activated.
Wearing Your Mio LINK
To accurately monitor your heart rate:
1. Fasten Mio LINK snugly on your lower forearm, about 1–3 inches above your wrist
bone. The optical sensor on the back should make good contact with your skin.
2. If you have a smaller wrist, wear Mio LINK higher on your forearm.
3. If you use Mio LINK for biking, wear it higher on your forearm, since bending of the
wrist may affect the heart rate reading.
4. For cyclists or users with concave wrists, try wearing Mio LINK on the underside of
your forearm.
LED
Optical
Sensor
Charging
Pins
Sensor
Lights
YOUR MIO LINK
Button