QUICK START GUIDE Setup your heart rate zones and register for product updates
MIO LINK To download the Complete User Guide, get important battery care information, and register your Mio LINK, visit: mioglobal.com/support. GETTING STARTED 1. Remove Mio LINK from the packaging. 2. Fasten Mio LINK on your wrist. 3. Press and hold the button to activate Mio LINK. The LED will light up. 4. After a few seconds the LED light will turn off. 5. You Mio LINK is now activated and in standby mode. Your Mio LINK 1. Button 2.
CHARGING YOUR MIO LINK 1. Make sure the 4 charging pins on the back of the Mio LINK are dry. If not, dry them with a towel. 2. Plug the USB connector of the USB dongle into the USB port of your computer. 3. Attach the 4 charging pins on the back of Mio LINK to the 4 charging pins on the USB dongle. The magnets in the charging pins will help the two pieces lock into place. The LED light will fade in and out slowly in a cyan color to indicate that the battery is charging.
• If you use Mio LINK for biking, wear it higher on your forearm, since the bending of the wrist will affect the heart rate reading. • If you often have cold hands or poor circulation, try exercising for a few minutes to increase blood flow before you begin to track your heart rate. Getting Your Heart Rate 1. To turn on Heart Rate Mode on your Mio LINK, press and hold the Button until the LED lights up.
COLOUR DESCRIPTION LOWER HR LIMIT UPPER HR LIMIT Cyan Resting 0% of MHR < 50% of MHR Blue Warm Up / Recovery 50% of MHR < 60% of MHR Green Fat Burn & Endurance 60% of MHR < 70% of MHR Yellow Aerobic Fitness 70% of MHR < 80% of MHR Magenta Anaerobic Intensive 80% of MHR < 90% of MHR Red Peak Performance 90% of MHR 220 BPM Note: This table is only a suggested range. Refer to Configuring Your Mio LINK (pg. 8) for more details.
Configuring Your Mio LINK You can customize the upper and lower boundaries of your heart rate zones through the Mio GO app. To connect your Mio LINK to Mio GO: 1. Turn on the Heart Rate Mode of your Mio LINK. 2. Open the Mio GO app on your smartphone or tablet. 3. Tap the Connect icon. Follow the prompts to scan and connect your Mio LINK. Mio GO is available for download from the Apple App Store and Google Play store. Note: Currently, the Android version of Mio GO will be for setup only.
wireless communication technology. You can connect your Mio LINK with any compatible smartphones or sport and fitness devices to receive the data. For a list of all compatible devices, please visit mioglobal.com/apps. TROUBLESHOOTING • Minimize wrist movement when Mio LINK is searching for your initial heart rate. • You may need to tighten the strap. • Try wearing Mio LINK higher on your forearm. • On colder days, activate heart rate reading before heading outdoors.
Setup your heart rate zones and register for product updates
©2014 Mio Global (Physical Enterprises Inc.
mioglobal.
