Operation Manual

Mio FUSE User Guide 09
DEVICE SETTINGS
YoucancongurethesesettingsthroughtheMioGOapp.SeeSetup for more information.
All-Day Screens
Select which metrics you would like displayed when you scroll through your screens in All-Day Mode.
Workout Screens
Select which metrics you would like displayed when you scroll through your screens in Workout
Mode.Youcanselectpredenedoptionsforvariousactivities,orcustomcongureyour
screens. You can also set your display to always on while you work out.
Daily Goal
Set a daily goal for steps taken, distance traveled, active calories burned, or total calories
burned. Track your progress towards the goal each day on the goal progress screen.
Arm Position
Select in Mio GO whether you will wear Mio FUSE on your left or right arm. The screen
orientationwillautomaticallychangetoreectyourselection.NotethatintheLeftarm
position, Touchpoint
A
will be above the display, and in the Right arm position, Touchpoint
A
will be below the display.
Vibration Alert
When vibration alerts are enabled, Mio FUSE will vibrate when you:
•
Begin heart rate monitoring
•
Start, pause, resume, or end a workout
•
Enter a new heart rate zone in 5-Zone Mode
•
Are outside your target zone in 1-Zone Mode
Screen Lock
Enable screen lock to prevent accidental triggering of your device. When Mio FUSE is locked,
tap any Touchpoint to see the last active screen. To unlock, touch and hold
B
and
C
simultaneously. The device will automatically relock after 10 seconds of inactivity.