Operation Manual

85
Icon Name Descriptions
Mode
Switches to the mode selection submenu. You can select a
shooting mode according to your current environment and need.
MioCam will determine certain settings to produce the results
you wish for.
The available options are:
Auto (default)
Daylight
Night
Image
Black-and-White
Zoom
Switches to the zoom factor selection submenu. This function is
available only when the resolution is set to low.
The available options are: 1.0x, 1.2x, 1.4x, 1.6x, 1.8x and 2.0x.
Flash
When you tap the icon or press the navigation button with the
icon highlighted, you can switch among three selections as
indicated by the flash icon in the status bar. The icon can be:
Auto (default). Flash fires when lighting is poor.
Anytime Flash
no icon No flash allowed
Self-Timer
Switches to the self-timer selection submenu. Timer setting is
helpful if you want to avoid obscure photos caused by shaking
of the Pocket PC when you press the button. For example, if you
set the timer to 5 seconds, the countdown will begin as you
release the shutter and (countdown icon) appears at the
upper right corner of the screen. You can then keep the Pocket
PC steady during the countdown period and, when it times up,
the photo is taken.
The available options are Non (default), 5s (5 seconds) and 10s
(10 seconds).
Setup Switches to the Setup menu. (See section 6.5 for details.)
When you complete a setting, select
(back icon) to go back to the
previous screen.