Operation Manual

106
NOTE: You may need proxy server and VPN connection settings. For more information,
see your network administrator.
Create a Wireless Connection to a Network
A wireless network can be added either when the network is detected, or
manually by entering settings information.
1. Insert the SD/MMC wireless network card into your Pocket PC. (For
information, see the documentation that came with the product.)
2. To manually enter information, tap

Settings

Connections
tab 
Connections

Network Card

Wireless
tab 
Add new
. If the network was
detected, step one is not necessary.
3. In the
General
tab, enter a network name. If the network was detected, the
network name is automatically entered and cannot be changed.
4. From
Connects to
, select what your network connects to,
Work
or the
Internet
.
5. To connect to an ad-hoc connection, select
This is a device-to-computer
(ad-hoc) connection
.
Networks that you have already configured are preferred networks and are listed
in Wireless networks. You can select to connect to only preferred networks or
have your Pocket PC search for and connect to any available network whether it
is preferred or not.
Ending a Connection

When connected via dial-up or VPN, tap t on the Navigation bar and
then tap
Disconnect
.

When connected via cable or cradle, detach your Pocket PC from the cable
or cradle.

When connected via a network (Ethernet) card, remove the card from your
Pocket PC.

When connected via a wireless network, switch off the connection.