User manual

Table Of Contents

3. To remove the device from the bike mount, rotate it counter-

clockwise.

Installing the sensors on your bike (Cyclo 405 HC)

1. Follow the instruction below to install the cadence/speed sensor kit

on your bike.

3 – 5 mm

2. Ensure that the magnets are aligned with the sensing area on the

sensors.

3. When done, you can manually pair the sensor with your device by

tapping Main menu > Settings > Sensors > Cadence/Speed.

The cadence sensor contains a replaceable CR2032 battery. Follow the

instructions below to replace the battery:

1. Locate the battery cover on the back of the sensor, and then twist the

cover anticlockwise (e.g. by using a coin) to remove the cover and

battery.

2. Insert the new battery into the battery chamber and replace the cover.

3. Twist the cover clockwise (e.g. by using a coin) to close the cover.

Installing the sensors on your bike (Cyclo 605 HC)

1. Follow the instruction below to install the cadence/speed sensor kit

on your bike.

• Speed sensor

1 2 3 4