User manual

5
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged when
you purchase it. You should charge the battery for at least 8 hours before
you start using it for the very first time.
To charge the battery:
• Via the computer
Connect your device to the computer by using the provided USB
cable. For more information, see "Connecting your device to the
computer" in this section.
• Using a mains power socket (Cyclo 605 HC only)
Connect your device to the power adapter by using the USB cable.
Plug the mains power charger into the power socket.
Note: It is recommended to use the supplied power adapter (selected models only; may
be sold separately) for a shorter charging time.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.
• When storing the product for a long period of time, charge the battery to 50% –
80% capacity to prevent excess discharge.
Performing the initial start-up
1. Mount the device and accessories on to your bike. For more
information, see the “Installing the device” section.
2. Press and hold the POWER button for 3 seconds to turn your device
on.
3 SEC
3. Follow the prompts to personalise your device, including:
• Select your preferred language.
• Set the date and time.
• Set the units format.
• Create your user profile.
Note: You can change these settings while using the device by tapping Main menu
> Settings.
4. Activate the map.