User manual

29
Manage
This setting allows you to manage the recorded data
on the device, including: History, Tracks, Strava Live
Segments, Favourites, Addresses, and POI.
To manage the data:
1. Tap the corresponding button in the Manage
screen.
2. Select the desired entry and then do one of the
following:
• Tap
to edit the name of the entry.
• Tap
to delete the entry.
Shimano Di2
Note: For selected models only.
• Cassette model: Select the proper cassette model.
• Cassette type: Select the proper cassette type.
Note: Set the lower value first, then the higher value.
• Crankset type: Select the proper crankset type.
• Battery status:
• When the Di2 sensor is connected, the current
battery level is displayed.
• When the battery level is 50%, the value
flashes.
• When the battery level is 30% or lower, the
value appears in red.
Lap
• Manually only: Mark a lap when
pressing the LAP (
) button on
the device.
• And by distance: The system
marks a lap automatically at the
specieddistance.
• And by position(s): The system
marks a lap automatically at one
of the following starting points:
• Recording start: The starting point of a new recording.
• Pressing LAP: When you press the LAP (
) button on the
device.
• Marked in recording: The lap point that is already existing in one
of your recordings.
• Recorded in tracks: The lap point that is already existing in one
of your tracks.
• Point on map: The point that you specify on the map screen.
Maps
• Auto Zoom: Enable or disable automatic zooming
during navigation.
If selected, the Map screen will automatically
zoom in or out, depending on your speed, to allow
optimal viewing of your route.
• Show Cities: Display or hide the current city name
on the navigation screen.
• Show Contour Lines: Display or hide the contour
lines on the navigation screen.
• Orientation: Enable or disable displaying North at
the top of the map screen.
• Map scheme: Select the preferred map display
style.