User manual

23
Using the lap feature
Note: The lap feature does not function when you are using the Indoor profile.
The lap feature functions when recording is in progress. This feature
helps you review the performances of your activities.
Each time you press the LAP (
) button on the device during recording,
the system will also record your current position as a lap point.
You can use the feature in the manual mode (default) or the auto lap
mode. To change the lap settings, tap Main menu > Settings > Lap.
(For more information, see the "Lap" section in "Customising your
device".)
• Manual mode: Mark a lap when pressing the LAP (
) button on the
device.
• Auto lap mode: The system marks a lap automatically based on the
lap point of your lap setting.
When a lap is marked, the screen will display the number, total time and
total distance of this lap.
You can synchronise data between your Mio and the MioShare website
via CycloAgent (or the WIFI Sync feature if supported), and then view
the lap data of your recording on MioShare.
Viewing the History
Your device will automatically save the history as the timer starts.
Information in History includes date, time, distance, average speed,
altitude, and more.
• To view the history data, tap
from the Main menu screen and then
select an entry from the list.
• Tap
/ to view details of the trip (or training).
• Tap GO to start navigating.
  
...
Viewing the summary of recorded data
On the History screen, tap the Summary button to view statistics about
the recorded data over a defined period of time based on the user
profile.
• ChangethelteroptionbytappingAll Recordings or Odometer.
Note: When the Odometer is selected, it displays all the training data existing on
the device even if the recording is not used.
• Tap the following button to decide what data to summarise: Totals,
Year, Month, Week or Day.