User manual

4. When done, you can manually pair the monitor with your device by tapping

Main menu > Settings > Sensors > Heart rate.

The heart rate monitor contains a replaceable CR2032 battery. Follow the

instructions below to replace the battery:

1. Locate the battery cover on the back of the monitor, and then twist the

cover anticlockwise (e.g. by using a coin) to remove the cover and battery.

2. Insert the new battery into the battery chamber and replace the cover.

3. Twist the cover clockwise (e.g. by using a coin) to close the cover.

Operating basics

Using the POWER button

• Turning on the device

Press and hold the POWER button for 3 seconds to turn on your device.

3 SEC

• Turning off the backlight

You can set the device to turn off the backlight automatically to reduce

the battery consumption: Main menu > Settings > System > Screen >

Backlight Timer.

Resume using the device to

turn on the backlight.

• Turning off the device

Press and hold the POWER button for 3 seconds to pop up the Power Off/

Cancel screen. Choose Power Off to turn off the device or Cancel to

continue operating the device.

3 SEC



Note: Press and hold the POWER button for 5 seconds to power off the device if it is

not responding.

Your device will automatically turn off after 10 minutes (by default) of

inactivity.

The Power Off/Cancel screen

will pop up and the device will be

turned off if you do not make a selection.