User manual

18
Where Am I The Where AM I screen displays your current GPS position with the coordinates info in map view. When tapping , you can see the number of satellites, your current position, and the strength of the signals. Manage This setting allows you to manage the recorded data on the device, including: History, Tracks, Addresses, and POI.
To manage the data: 1. Tap the corresponding button in the Manage screen. 2. Select the desired entry and then do one of the
following: • Tap to edit the name of the entry. • Tap to delete the entry.
Maps • Auto Zoom: Enable or disable automatic zooming
during navigation. If selected, the Map screen will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route.
• Show Cities: Display or hide the current city name on
the navigation screen.
• Orientation: Enable or disable displaying North at the
top of the map screen.
• Map scheme: Select the preferred map display style.
System Screen
• Brightness: Drag the slider to the left to decrease the
screen brightness or to the right to increase the screen brightness. Note: You can also decrease/increase the screen brightness by tapping / . Note: To increase your battery life during a ride, ,make sure the screen brightness is turned down to reduce the battery consumption.
• Backlight Timer: Tap the option to select how long (from 15 seconds to
Never) the display screen remains lit after you press the POWER button.
• Screen Lock Timer: Tap the option to select how long of inactivity (from 5
seconds to Never) will lock the device screen.
• Auto Power Off Timer: Tap the option to select how long of inactivity (from
10 minutes to Never) will turn off the device automatically.
Alerts • On tap screen: Enable or disable the feedback sound
while tapping on the screen.
• Instructions: Enable or disable the sound while getting
instructions.
• Auto Recording: When disabled, a message will display
asking if you want to start recording when movement is detected.