User's Guide

Mio ALPHA User Guide 10
To Charge The Battery
1. Make sure that the four connection pads on the watch caseback are dry. If not, dry
them with a towel.
2. Plug the USB dongle into the USB port of your computer.
3. Attach the 4 connection pads on the caseback to the 4 connection pads on the
dongle. The magnets in the connection pads will help the two pieces lock into place.
Thedisplaywillindicatethatthebatteryischarging,andtheblueLEDwillash.
Tip: When the battery is nished charging, the display will say FULL .
Battery Care Guidelines
•
Recharge the battery at least once every 6 months.
•
Do not expose the watch to high temperatures.
•
Usethewatchinthetemperaturerangeof5°Cto45°C(41°Fto113°F).
•
Storethewatchinthetemperaturerangeof0°Cto25°C(32°Fto77°F).
•
Do not disassemble, puncture, or incinerate the watch or battery.
•
If the watch casing breaks and the battery is exposed, keep the battery away from
children.
Battery Replacement
•
The battery lifetime is about 300 charge cycles. If you charge the battery every week,
the battery should last for 5 years.
•
When the battery charge length is obviously shorter than before, visit
mioglobal.com/supporttondouthowtoreplacethebattery.
•
Contact your local recycling authority for information about disposing of the watch
and battery.
USING YOUR MIO ALPHA IN WATER
•
The Mio ALPHA is water-resistant; you can wear your ALPHA while swimming.
Important: Do not press the watch buttons under water.
•
The accuracy of the heart rate monitor might be reduced in cold water or if you are
using large arm movements.
•
Do not wear your ALPHA while diving.
•
RF transmission does not work under water.
•
After swimming, rinse your ALPHA with tap water and dry it with a soft cloth.