Instructions / Assembly

Directions

WARNING! Removal of old paint by sanding, scraping or other means may generate

dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain

damage or other adverse health effects, especially in children or pregnant women.

Controlling exposure to lead or other hazardous substances requires the use of proper

protective equipment such as a properly fitted respirator (NIOSH approved) and

proper containment and cleanup. For more information, call the National Lead

Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

FOR PROJECT APPLICATION:

1. Surface must be dry and free of old finishes in poor condition, paint, wax,

grease, polish, dirt or other foreign matter.

2. Sand to obtain a smooth, uniform surface. Do not use steel wool. Remove all

sanding dust. Thoroughly wipe clean with a damp cloth. Allow to dry

completely.

3. If desired, apply Minwax® Wood Finish™ or Minwax® Gel Stain to bare

wood following all label directions. Wait 8 hours before applying Water Based

Polyurethane over stain.

PAGE 1
Directions WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.
PAGE 2
4. Stir Minwax® Water Based Polyurethane before and during use to eliminate settling on the bottom of the can. Stir in such a manner as to rotate the product from the bottom to the top of the can. NEVER SHAKE. 5. Apply a THIN coat of Water Based Polyurethane using a high quality synthetic bristle brush or foam brush. 6. Let dry 2 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust. 7. Apply a second coat.
PAGE 3
WARNING! EYE AND SKIN IRRITANT CAUTIONS: CONTAINS DIMETHYLETHANOLAMINE AND 1-METHYL-2-PYRROLIDONE. CONTAINS MATERIAL THAT MAY CAUSE REPRODUCTIVE EFFECTS AND MAY ADVERSELY AFFECT THE DEVELOPING FETUS BASED ON ANIMAL DATA. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.