SDS

Section 12. Ecological information
LogP
ow
BCF
Potential
Bioaccumulative potential
Other adverse effects
:
No known significant effects or critical hazards.
Product/ingredient name
Toluene
-
90
low
Methanol
-
<10
low
Polyethylene Glycol
-
3.2
low
Product/ingredient name
Aquatic half-life
Photolysis
Biodegradability
Acetone
-
-
Readily
Toluene
-
-
Readily
Weanling)
Acute LC50 5500 µg/l Fresh water
Fish - Oncorhynchus kisutch - Fry
96 hours
Chronic NOEC 1000 µg/l Fresh water
Daphnia - Daphnia magna
21 days
Methanol
Acute EC50 16.912 mg/l Marine water
Algae - Ulva pertusa
96 hours
Acute LC50 2500000 µg/l Marine water
Crustaceans - Crangon crangon -
Adult
48 hours
Acute LC50 3289 mg/l Fresh water
Daphnia - Daphnia magna -
Neonate
48 hours
Acute LC50 290 mg/l Fresh water
Fish - Danio rerio - Egg
96 hours
Chronic NOEC 9.96 mg/l Marine water
Algae - Ulva pertusa
96 hours
Polyethylene Glycol
Acute LC50 >1000000 µg/l Fresh water
Fish - Salmo salar - Parr
96 hours
Persistence and degradability
Soil/water partition
coefficient (K
OC
)
:
Not available.
Mobility in soil
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers.
:
Disposal methods
Section 14. Transport information
Date of issue/Date of revision
:
4/6/2015.
Date of previous issue
:
No previous validation.
Version
:
1
12/14