SDS

Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
0.87
5 [Air = 1]
0.023 kPa (0.169 mm Hg) [at 20°C]
Not available.
Not available.
Odor
pH
Not available.
Color
Evaporation rate
0.13 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: 39°C (102.2°F) [Pensky-Martens Closed Cup]
Not available.
Not available.
Viscosity
Kinematic (room temperature): <0.205 cm
2
/s (<20.5 cSt)
Kinematic (40°C (104°F)): <0.205 cm
2
/s (<20.5 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
148°C (298.4°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Lower: 1%
Upper: 8.8%
Decomposition temperature
:
Not available.
Heat of combustion
:
28.2 kJ/g
Aerosol product
Molecular weight
:
Not applicable.
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
10/28/2015
Date of previous issue
:
10/15/2015
Version
:
1.06
7/13