Instructions / Assembly

Directions:

WARNING: If you scrape, sand or remove old paint, you may release lead

dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-

800-424-LEAD or log on to www.epa.gov/lead.

1. Completely remove decayed and very soft, crumbly wood until you

reach reasonably sound wood. Wood should be dry, free from dirt,

grease, oil and loose paint particles.

2. Shake can well; apply Minwax® High Performance Wood Hardener with

a disposable bristle brush to the softened wood to completely saturate

the area.

3. For strength, apply several coats in quick succession until a shiny

surface appearance is obtained.

PAGE 1
Directions: WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1800-424-LEAD or log on to www.epa.gov/lead. 1. Completely remove decayed and very soft, crumbly wood until you reach reasonably sound wood. Wood should be dry, free from dirt, grease, oil and loose paint particles. 2.
PAGE 2
4. Allow to harden for 2-4 hours before filling void with Minwax® High Performance Wood Filler. 5. Sand, paint, or stain if desired. CLEANUP: A disposable bristle brush is recommended. If not available, clean the brush with acetone, following manufacturer's safety instructions. DANGER! EXREMELY FLAMMABLE. VAPORS MAY CAUSE FLASH FIRES! VAPOR HARMFUL. IRRITATES EYES, SKIN AND RESPIRATORY TRACT CAUTIONS: CONTAINS KETONES. Contents are EXTREMELY FLAMMABLE. Keep away from heat, sparks, and open flame.