SDS

Section 9. Physical and chemical properties
Vapor pressure
Relative density
Vapor density
Solubility
0.86
1.11 [Air = 1]
3.1 kPa (23 mm Hg) [at 20°C]
Not available.
Auto-ignition temperature
Not available.
Not available.
Viscosity
Kinematic (room temperature): >0.07 cm
2
/s (>7 cSt)
Kinematic (40°C (104°F)): >0.07 cm
2
/s (>7 cSt)
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
Lower and upper explosive
(flammable) limits
:
Lower: 2.6%
Upper: 36.5%
Decomposition temperature
:
Not available.
Heat of combustion
:
20.51 kJ/g
Aerosol product
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
Acetone
LD50 Oral
Rat
5800 mg/kg
-
Methanol
LC50 Inhalation Gas.
Rat
145000 ppm
1 hours
LC50 Inhalation Gas.
Rat
64000 ppm
4 hours
LD50 Dermal
Rabbit
15800 mg/kg
-
LD50 Oral
Rat
5600 mg/kg
-
Product/ingredient name
Result
Species
Dose
Exposure
Irritation/Corrosion
Information on toxicological effects
Date of issue/Date of revision
:
4/6/2015.
Date of previous issue
:
No previous validation.
Version
:
1
7/12