SAFETY DATA SHEET 41700 Section 1. Identification Product name : MINWAX® High Performance Wood Hardener Product code : 41700 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosionproof electrical, ventilating, lighting and all material-handling equipment. Use only nonsparking tools. Take precautionary measures against static discharge. Keep container tightly closed.
Section 4. First aid measures Skin contact Ingestion : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention. If necessary, call a poison center or physician. Wash clothing before reuse. Clean shoes thoroughly before reuse. : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use dry chemical, CO₂, water spray (fog) or foam. Unsuitable extinguishing media : Do not use water jet. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Highly flammable liquid and vapor.
Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated.
Section 8. Exposure controls/personal protection Appropriate engineering controls Environmental exposure controls : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Section 9. Physical and chemical properties Lower and upper explosive (flammable) limits Vapor pressure : Lower: 2.6% Upper: 36.5% Vapor density Relative density : 1.11 [Air = 1] : 0.86 Solubility : Not available. Partition coefficient: noctanol/water Auto-ignition temperature : Not available. Decomposition temperature : Not available. Viscosity : Kinematic (room temperature): >0.07 cm2/s (>7 cSt) Kinematic (40°C (104°F)): >0.07 cm2/s (>7 cSt) Aerosol product Heat of combustion : 3.
Section 11.
Skin contact : No known significant effects or critical hazards. Ingestion : Can cause central nervous system (CNS) depression. Irritating to mouth, throat and stomach.
Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure Acetone Acute EC50 20.565 mg/l Marine water Acute LC50 6000000 µg/l Fresh water Acute LC50 10000 µg/l Fresh water Acute LC50 5600 ppm Fresh water Chronic NOEC 4.95 mg/l Marine water Chronic NOEC 0.016 ml/L Fresh water Chronic NOEC 0.
Section 14. Transport information DOT Classification TDG Classification Mexico Classification UN1263 IATA UN1263 IMDG UN number UN1263 UN1263 UN proper shipping name PAINT RELATED MATERIAL PAINT RELATED PAINT RELATED PAINT RELATED PAINT RELATED MATERIAL MATERIAL MATERIAL MATERIAL Transport hazard class(es) 3 3 3 Packing group II II II II II Environmental hazards No. No. No. No. No.
Section 16. Other information Notice to reader It is recommended that each customer or recipient of this Safety Data Sheet (SDS) study it carefully and consult resources, as necessary or appropriate, to become aware of and understand the data contained in this SDS and any hazards associated with the product. This information is provided in good faith and believed to be accurate as of the effective date herein. However, no warranty, express or implied, is given.