Instructions / Assembly

Directions

WARNING! Removal of old paint by sanding, scraping or other means may

generate dust or fumes that contain lead. Exposure to lead dust or fumes may

cause brain damage or other adverse health effects, especially in children or

pregnant women. Controlling exposure to lead or other hazardous substances

requires the use of proper protective equipment such as a properly fitted

respirator (NIOSH approved) and proper containment and cleanup. For more

information, call the National Lead Information Center at 1-800-424-LEAD (in

US) or contact your local health authority.

1. Surface must be dry and free of old finishes in poor condition, wax,

grease, polish, dirt or other foreign matter.

2. Sand to obtain a smooth, uniform surface. Remove all dust with a cloth

dampened with mineral spirits.

3. If desired, apply stain, such as Minwax® Wood Finish™, following the

label directions for application instructions and dry times.

PAGE 1
Directions WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.
PAGE 2
4. Shake Wipe-On Poly container thoroughly before use. 5. Put a liberal amount of Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood. 6. Allow to dry at least 2-3 hours. Sand entire surface lightly with very fine sandpaper (220 grit) or fine steel wool. Remove all sanding dust. 7. Apply a second coat in the same manner as the first. If a third coat is desired, repeat Step 6 before application. 8. Allow final coat to dry 24 hours before normal use.
PAGE 3
DANGER! HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE! VAPOR HARMFUL. IRRITATES EYES, SKIN AND RESPIRATORY TRACT CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.