SAFETY DATA SHEET 35610 Section 1. Identification Product name : MINWAX® One Coat Polyurethane Gloss : 35610 Product code Other means of : Not available. identification Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Get medical attention if you feel unwell. IF exposed or concerned: Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. : Store locked up.
Section 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.
Section 5. Fire-fighting measures Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Decomposition products may include the following materials: carbon dioxide carbon monoxide nitrogen oxides : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Section 8. Exposure controls/personal protection 1-Methyl-2-Pyrrolidone CA Ontario Provincial (Canada, 7/2015). TWA: 400 mg/m³ 8 hours. AIHA WEEL (United States, 10/2011). TWA: 10 mg/m³ 8 hours. Form: Aerosol CA Alberta Provincial (Canada, 4/2009). Absorbed through skin. 8 hrs OEL: 100 ppm 8 hours. 15 min OEL: 909 mg/m³ 15 minutes. 8 hrs OEL: 606 mg/m³ 8 hours. 15 min OEL: 150 ppm 15 minutes. CA British Columbia Provincial (Canada, 7/2016). Absorbed through skin. TWA: 100 ppm 8 hours.
Section 8. Exposure controls/personal protection Hand protection Body protection Other skin protection Respiratory protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties.
Section 10. Stability and reactivity Conditions to avoid : No specific data. Incompatible materials : No specific data. Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11.
Section 11. Toxicological information Name Category Route of exposure Target organs Butoxypropanol Category 3 Not applicable. Ethylene Glycol Category 3 Not applicable. 1-Methyl-2-Pyrrolidone Category 3 Not applicable.
Potential chronic health effects Not available. General : May cause damage to organs through prolonged or repeated exposure. Carcinogenicity : No known significant effects or critical hazards. Mutagenicity : No known significant effects or critical hazards. Teratogenicity : May damage the unborn child. Developmental effects : No known significant effects or critical hazards. Fertility effects : No known significant effects or critical hazards.
Section 13. Disposal considerations Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Section 14. Transport information DOT Classification TDG Classification Mexico Classification IATA IMDG UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - Transport hazard class(es) - - - Packing group - - - - - Environmental hazards No. No. No. No. No.
Section 16. Other information Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service mark of the American Coatings Association, Inc.