SDS
Section 8. Exposure controls/personal protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Respiratory protection
:
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
0.91
5 [Air = 1]
0.023 kPa (0.169 mm Hg) [at 20°C]
Not available.
Not available.
Odor
pH
Not available.
Color
Evaporation rate
0.13 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: 41°C (105.8°F) [Pensky-Martens Closed Cup]
Not available.
Not available.
Viscosity
Kinematic (room temperature): <0.07 cm
2
/s (<7 cSt)
Kinematic (40°C (104°F)): <0.07 cm
2
/s (<7 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
148°C (298.4°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Lower: 1%
Upper: 8.8%
Decomposition temperature
:
Not available.
Heat of combustion
:
0.00002328 kJ/g
Aerosol product
Section 10. Stability and reactivity
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
4/6/2015.
Date of previous issue
:
No previous validation.
Version
:
1
7/12