Instructions / Assembly
Directions 
WARNING! Removal of old paint by sanding, scraping or other means may 
generate dust or fumes that contain lead. Exposure to lead dust or fumes may 
cause brain damage or other adverse health effects, especially in children or 
pregnant women. Controlling exposure to lead or other hazardous substances 
requires the use of proper protective equipment such as a properly fitted 
respirator (NIOSH approved) and proper containment and cleanup. For more 
information, call the National Lead Information Center at 1-800-424-LEAD (in 
US) or contact your local health authority. 
INTERIOR USE ONLY 
1.  Sand floor as appropriate for the type of floor finishing project. Carefully 
follow label directions and the directions for the sander that you are 
using. 
2.  Remove all dust, then thoroughly wipe the floor with a clean cloth 
dampened with mineral spirits and allow to dry. 
3.  Before use, stir Minwax® Super Fast-Drying Polyurethane for Floors to 
rotate the product from the bottom to the top of the can. You will not 
need to stir again if the project will be completed in one day. 



