User`s manual

SNMP-SSL
7
Configuration through the Serial Port
1. Use the RJ45 to RS232 serial cable to connect between the SNMP-SSL card’s COM
port and the COM port on the workstation.
2. Set both the DIP-switches of the SNMP-SSL card to the OFF position (operating
mode) for configuration.
Figure 2-2: Serial cable connection of SNMP-SSL
3. From a workstation running Microsoft Windows (9x, Me, NT4.0, 2000, XP, 2003 or
later), open HyperTerminal of the Accessory Program Group.
Figure 2-3: HyperTerminal in the Accessory programs group