User`s manual

SNMP-SSL

Installing the Shutdown Software in SCO OpenServer UNIX

1. From a workstation running SCO OpenServer login as a supervisor.

2. Insert the SNMP-SSL CD-ROM into the CD-ROM drive.

3. If you have already mounted the CD-ROM drive, skip to step 5

4. Type mount /dev/cd0 /mnt

5. Select "Filesystems" -> "Filesystem Manager" -> "Mount" -> "Add Mount

Configuration" -> "Local"

6. Select a "Device File" and enter the name of the "Mount Point" (Ex: /mnt). Then

select "OK"

7. Copy the shutdown programs into the directory and extract the programs to the

directory of ./uGuard

a. # mkdir uGuard

b. # cp /mnt/client/SCO/SD_SCO_4_20_USHA.tar /uGuard/uGuard.tar

c. # cd /uGuard

d. # tar xvf uGuard.tar

e. Type “./install.sh” to proceed with the installation procedure.

f. # ./install.sh

g. The shell command will invoke the 'vi uGuard.conf', the user must modify the

remote host value, host name and local delay. After saving the file, the installation

is complete.