User`s manual

SNMP-SSL
54
Extra Browsing Options PDA & WAP
SNMP-SSL now provide more easy of using remote browsing ways. User can get the
UPS status through PDA or WAP mobile phone, which own ability to connect to Internet
already. According to every manufacturer setting was different, please reference to PDA
and WAP User Manual for connect to Internet. If your PDA or WAP can browse Internet,
You can start browsing the UPS status by input the SNMP-SSL address.
PDA
Please input on PDA: “SNMP-SSL address/PDA” or “SNMP-SSL address/P” Example:
HTTP://192.168.11.100/PDA or HTTP://192.168.11.100/P you can see the UPS’s status
page.
Figure 7-6 Extra Browsing Options –PDA
WAP
Please input: “SNMP-SSL card’s address/WAP” or “SNMP-SSL card’s address/W”
Example: HTTP://192.168.11.100/WAP
or HTTP://192.168.11.100/W you can see the
UPS’s status page.
UPS Status:
UPS Status: On Line
Voltage In (VAC): 126.0
Voltage Out (VAC): 120.0
Output Load (%): 37
Frequency (Hertz): 60.0
System Up Time: 0day 12:02:14
Menu
SNMP-SSL Menu
Status
Identification
Battery
Input
Output
Clients
Identification:
UPS Model: ED1500RM2U
Output VA: 1500
UPS Type: On-Line
UPS Firmware: 04
SNMP-SSL Firmware: V2.00
Location: Office
Admin: MIS
System Up Time: 0day 12:43:12
Menu
Battery:
Battery Status: Battery Ok
Time since on Battery Power
(Sec):
0
Battery Capacity (VDC): 100
Battery Voltage (VDC): 55.2
Battery Temperature (Celsius) 30.0
Menu
Input:
Voltage In (VAC): 126.0
Frequency (Hertz): 60.0
Menu
Output:
Voltage Out (VAC): 120.0
Output Load (%): 37
Menu
Clients:
1: 192.168.11.209
Menu