User`s manual

SNMP-SSL

WakeOnLAN Targets

WOL" function allows you to start up client PCs through the network. 32 clients can be set

up. After the client shuts down because of the UPS shutdown events, the WOL packet will

be sent to client to wake up the PC.

1. Repeating Times: The number of times the packets will be sent.

2. Interval Timer (Sec): The time before the next packet is sent.

3. Set Value: Saves the settings.

4. Index: The index number of the entry in the table.

5. MAC Address: The MAC address of the targeted PC.

6. Action: Enable or Disable the targeted PC.

7. Description: Customer description string.

8. Modify: Allows you to modify the action.

9. Add New: Allows you to add 32 targets.

10. Wake On LAN Test: Test the Wake On LAN function.

Figure 5-10 WakeOnLAN Targets