User`s manual

SNMP-SSL

SNMP TRAP Receivers

This menu allows the administrator to configure the SNMP-SSL card to send SNMP Traps

to eight different Network Management Stations (NMS). The MIB files must be installed on

the NMS.

1. Index: The index number of the entry in the table.

2. NMS IP Address: The IP Address of the NMS station to which the trap should be

sent.

3. User Name: The User Name of the specified trap receiver. 19-characters are the

maximum length of the string.

4. Trap Type: Types of traps to be received.

a. None: No traps are to be received.

b. RFC-1628 Trap: Traps are received base on RFC-1628.

c. SNMP-SSL Trap: Traps are received base on SNMP-SSL MIB.

5. Severity: Set the level of the trap to be received. There are three levels:

a. Information: Traps of general information are received.

b. Warning: Traps that warn of the impending danger are received.

c. Severe: The significant traps such as the UPS failure and severe events are

received.

6. Description: Customer description string.

Figure 5-9 SNMP TRAP Receivers