User`s manual

SNMP-NV6
Page 23
5.5.1.6 Battery Replacement Date
After the battery replacement dates are assigned, the card then sends the command to
store these dates in the UPS.
5.5.1.7 External Battery Pack
If you are using an External Battery Pack with this UPS, the UPS must be configured so
that; the UPS will report the correct estimated runtime.
5.5.1.8 Outlet Banks
Configure the Outlet Banks to turn off once a power event occurs. Turning off non-
mission critical equipment once a power event occurs can extend the battery backup time
for the mission critical equipment.
5.5.1.9 Economy Mode
Configure the UPS to operate in the Economy mode. See the UPS user’s manual for the
Economy mode operation.
5.5.2 Control
This menu allows you to send the control commands to the UPS.
5.5.2.1 Battery Test
The card sends the command to the UPS to perform a battery test.
5.5.2.2 Shutdown & Restart UPS Only
The card sends the command to the UPS to perform the Shutdown and/or Restart
function.