User`s manual

SNMP-NV6
Page 16
5. Web Interface
5.1 Run a Web Browser
1. Make sure that you have a TCP/IP network already installed.
2. Start your Web Browser. Enter http://host_name or http://ip_address in the
address bar for the plain web transmission or https://host_name or
https://ip_address for the encrypted web transmission. The SNMP-NV6 card will
then ask for your user name and password. After keying in the correct user name
and password, the SNMP-NV6 card’s Home Page will appear on the screen.
3. If the login page does displayed, but you are unable to login with the correct user
name and password, it might be because that the IP address that you used to login
is different from the SNMP-NV6 card’s IP address subnet.
Note: The SNMP-NV6 cards will automatically logout the user if there is no activity for
30-minutes.
5.2 Monitor Information
This section includes information about the UPS Properties, Battery Parameters, Input/Output
Parameters, Identification, Status Indication and the ShutdownAgent. Because different
models provide different information, the model you have may not display the same
information.