User`s manual

44
Bottom Layer Buttons
Each button shows the respective information in the Information Area.
a. Main: General Information about the UPS.
b. Tree: There are 2 sub-trees in the SentryPlus tree: System and UPS. The system tree is
for host information and the status of Master/Slave connection, the UPS tree is for all other UPS
information.
c. Time: Displays the time for all schedules, battery replacement date and countdown time.
d. Status: UPS status.
e. Diagram: Displays the input and the output power flow of the UPS.
f. Scroll: UPS data graph.
g. Receptacle: Displays the UPS receptacle status (If your UPS cannot control the receptacle
this button will not appear).
h. Network: Indicates the connection of Master/Slave, SentryPlus Monitor and SentryPlus
Service.
Main
a. UPS Health: 3-levels: Green, yellow and red.
b. UPS Type: On-Line, Off-Line, Line-Interactive or 3-phase On-Line.
c. UPS Model: The UPS model, which is being monitored by SentryPlus.
d. Firmware Version: Indicating the firmware version of the UPS.
e. Host Name: The host, which runs SentryPlus.
f. Rating VA: The UPS VA rating.
g. Rating Input Voltage: The UPS input voltage rating.
h. Rating Current: The UPS current rating.
i. Rating Battery Voltage: The UPS battery voltage rating.
j. Rating Input Frequency: The UPS input frequency rating.
k. Test Result: Results of the last self-test.
l. AC Source: Normal, battery or bypass.
m. Battery Status: The status of battery.
n. Battery Level: Percentage of battery level.
o. Loading: Percentage Output loading.
p. SentryPlus with the ability to change the display item of the meters, the referred menu
item: System-> Main Screen.