User`s manual

27
Action - SNMP Trap
Lets you send a SNMP trap when the related power event occurs. To enable or disable
this action, mark the Enable SNMP Trap check box. You also need to specify the SNMP
Trap target hosts and community string. Please see the SNMP dialog box in the Network
menu.
Action - Receptacle Control (not all UPSs support this function)
Allows you to control the Receptacle Relay on or off. Each Receptacle Relay may control
not only one outlet, please see the rear panel of your UPS or the UPS hardware user's
manual.
Stop All Action
Clicking on this terminates all the actions immediately.