User`s manual

21
Attached Devices
Allows the user to assign the attached device a name. When you are controlling the
receptacle, SentryPlus will let you know which devices you are controlling.
a. Select an Outlet Group: Assigns an outlet group. Please look at the back panel
carefully, some outlets may share one control relay, these outlets are called outlet group.
If you turn off outlet group (for example: outlet1 and outlet2) then the UPS will stop power
to the outlet group outlet1 and outlet2.
b. Device Name: Assigns the attached devices a name, for example: Outlet Group1 is
called Monitor for association with the monitor and Outlet Group2 is called Computer for
association with the CPU. These records can improve the efficiency of your management.
Do not forget to press the Update button.
c. Update: Updates your change.
Log Management:
a. Maximun Event Log Entries: This is the maximum number of Events that SentryPlus will
log.
b. Data Log Interval: Time designated for automatic saving of a record of UPS data.
c. Maximum Data Log Storage: It allows you to save how many months of UPS data files
you wish to keep.