User`s manual

18
The software will set the modem to notify all via the pager numbers, which are listed in the
pager list. You can input your pager number for your own notification purposes. For
example: 060123456 is your pager number, each ',' tells modem to delay 2 seconds, delay
time is for setting waiting period for the response signal, before proceeding to transmit to
the displayed number 119. 119 will appear in your pager LCD.
To trigger the pager notification you must enable the Pager Action in the Action dialog box.
a. COM Port: The communication port COM1 - COM4.
b. Baud Rate: Set the data transmitting speed.
c. Initialize String: The string, which is sent to the modem before paging is attempted.
d. Dial Prefix: The string, which is added to the beginning of each of the Pager Number
before they are sent to the modem.
e. Using TAPI: Lets Windows handle the modem device.
f. Add: Add a new pager number.
g. Modify: Modify the selected pager number.
h. Delete: Delete the selected pager number.
Notification Users - email
You can also e-mail users through SMTP when power events occur.
To trigger the e-mail notification you must enable the e-mail Action in the Action dialog box.
a. Add: Add a new user.
b. Modify: Modify the selected user name.
c. Delete: Delete the selected user.
Notification Users - Network Broadcast
You can also broadcasting information to users when power event has occurred. The
broadcast function is associated with Microsoft Messenger to send messages you must run
under the Windows NT operating system.
To trigger the broadcasting notification you must enable the Broadcast Action in the Action
dialog box.
a. Domain: Enable this item to broadcast to all the users in the domain, otherwise
SentryPlus will send messages to the hosts that users assigned.
b. Add: Add a new machine name.
c. Modify: Modify the selected machine name.
d. Delete: Delete the selected name.