User`s manual

16
Configuration
The Configuration Screen has a menu bar at the top with three main options:
Devices: This menu allows you to configure modem, pager and e-mail applications.
UPS: The UPS menu allows you to plan and set the UPS schedule or perform the Action.
Network: This menu allows you to choose the Master/Slave settings or configure SNMP, HTTP
functions.
Configuration Window
UPS Communication Port: COM1, - COM4, USB.
Next UPS Test Date/Time: The date of the next user-initiated UPS self test. Setting from
System->Configuration->UPS->Schedule.
Next UPS Shutdown Date/Time: This field displays the date of the next shutdown the
computer and UPS. Setting from System->Configuration->UPS->Schedule.
Next UPS Restart Date/Time: The date of the next restart UPS. Setting from
System->Configuration->UPS->Schedule.
Local Host IP: IP address of a computer, which runs SentryPlus Monitor.
SentryPlus Service Mode: SentryPlus Service acts as a Master or Slave.
Remote Host IP: The host, which runs SentryPlus Service. If SentryPlus Monitor and
SentryPlus Service runs on the same computer and this field will be empty.