User`s manual

12
SentryPlus Monitor Operation
The Main Screen has 7 areas that present information on the operating status of your UPS.
Host Selection: Press the combo box to select hosts that runs SentryPlus in the LAN.
Users can monitor or control the UPS remotely (password is needed).
Connection Indication: The logo will rotate while the communication between SentryPlus
Monitor and SentryPlus Service is established.
Information Display: Press Bottom Layer Buttons to change the information that is
displayed in this area.
Recent Event Log: Preserve last 10 event logs in the combo box, click on the combo box
to pull down and view the logs.
Top Layer Buttons
These buttons are used to display information about your UPS, refer to the dialog boxes in
the menu.
Configuration: Same as the System-> Configuration in the menu.
Meters: Same as the View-> Meters in the menu.
Event Log: Same as the View-> Event Log in the menu.
History Graph: Same as the View-> History Graph in the menu.