Specifications

Parts and Instruction Manual
Page 27
Drive system speed
controller.
Check error fault codes
(See page 15)
Reset machine: Turn key
switch off and restart.
No FWD/REV drive
Emergency stop switch
tripped
Activate switch by turning as
indicated by arrows.
Recovery tank full Empty recovery tank
Excessive foaming in
recovery tank.
Empty recovery tank.
Use less or change
chemical.
Use defoaming agent.
Vacuum motor does
not turn on
Five LEDs flashing on Battery
Gauge
Check for motor overload.
Reset machine: Turn key
switch off and restart.
Debris box full Empty and clean debris box
Brushes worn Replace brushes
Poor sweeping
performance
(Cylindrical System)
Bristles have taken a set Rotate brushes
Solution tank empty Refill solution tank Solution tank empty
indicator light on
Faulty float switch Replace float switch