Specifications

Bid Specifications for

the SCV

24/26

Automatic Rider Scrubber

Type: The machine shall have two types of easy -to-change cylindrical and disc brush decks and

be a 36 volt battery-operated automatic rider scrubber, capable of cleaning a floor by applying

solution, scrubbing the surface with either cylindrical or disc brushes and recovering the solution by

means of a negative air parabolic squeegee. The cleaning path shall be 24” or 26” in width.

Construction: The frame of the machine shall be made of heavy gauge structural steel tubing.

All components shall be coated with a powder paint to resist corrosion. The tank and body of the

machine shall be made of rotationally molded polyethylene.

Dimensions: The dimensions of the machine shall be 60”L x 22”W x 57”H, the weight of the

machine shall be 1,010 lbs. including the batteries.

Batteries: The machine shall operate on (3) 12v/210AH batteries, creating a 36-volt operating

system. The charging port for the batteries shall be located internally and shall disconnect the

machine from the battery pack, when charging for safety.

Drive System: A 3/4 H.P double reduction DC motor shall drive the machine. The machine

shall be capable of moving in a forward and reverse direction that is determined by a switch. An E-

Mag brake shall be incorporated on the main drive tire. The forward linear speed shall be 0 – 6

mph, as regulated by a foot-operated pedal.

Tanks: The machine shall have solution and recovery tanks that will have 27 gallon capacities.

The tank shall be made of rotationally molded polyethylene.

Scrub Path: The machine shall have either two 12” or 13” counter-rotating, offset disc brushes

or pad holders, or a 24” or 26” cylindrical deck.

Squeegee: The machine shall have a 32.5” curved, swing-type, break-away squeegee with

extended soft ends totaling 33” on the SCV24/26 model. The squeegee shall be made of gum

rubber or Linatex as an option. When the operator selects the proper setting, the squeegee will

lower when the machine propels forward ,and lift up when the machine moves in reverse. No tools

shall be required to remove the squeegee from the machine, or to change the squeegees blade

themselves. The front squeegee shall have both slit and non-slit blade sides.