Specifications

11 Recovery Tank Discharge
12 Operator's Compartment
The recovery tank of the SCV has a 1/2" discharge hose that will allow for quick and easy
emptying of the recovery tank. Another unique feature of the SCV is the 4" clean out cap
that is a must when scrubbing in heavy sediment conditions. To use this unique feature,
just drain the tank of all recovery water, tip the tank back and flush the entire recovery tank.
Remember to remove the squeegee assembly first so that you do not deposit unwanted
sediment onto the squeegee.
The Minuteman SCV 24/26 is designed to give the operator a 180 degree field of vision.
The machine is equipped with ergonomic adjustable, cushioned seat, and a three
position adjustable steering column. Have the operator sit on the SCV and adjust the
machine to their comfort level. Now show the customer the simple operation panel.
Located on the control panel are two knobs, one on the operator's left and one on the
right. The knob on the left controls the amount of water flow that will go to the scrub
deck. The knob on the right has five positions that allow the customer to select what
mode of operation they would like to perform. The panel uses universal symbols to
show the operator which mode the machine is in. Located at the top of the control
column is the battery condition meter which is on the operator's left. To the operator's
right are two vertical lights that indicate whether the rider is in the forward or reverse
mode.
10 Rear Squeegee Assembly
The squeegee is by far the most critical feature of any rider scrubber. Minuteman is
proud of the industrial parabolic swing squeegee that is equipped with all SCV rider
scrubbers. The squeegee system includes a no-tool change and is available with linatex
squeegee for heavy oils and comes standard with a gum rubber squeegee for commer-
cial applications. The squeegee itself can be turned over and reused up to four times.
Point out that this will allow the operator to keep cleaning even if a squeegee is dam-
aged. The SCV squeegee system automatically picks up in reverse, saving the operator
from unexpected damage. Show how easy it is to adjust the squeegee, just by turning
the adjustment wing nuts located on the squeegee assembly. Point out the unique side
squeegees that contain any water that may leave the scrub deck. These squeegees are
attached to the scrub deck and allow for perfectly dry floors when turning. Point out that
the side squeegees raise and lower with the deck, reducing excess squeegee wear.
9 Easy On/Off Brushes (disc deck)
To remove the brushes from the disc deck, simply remove the two 3/8" wing nuts holding
the brush shroud in place on either side of the scrub deck. Once removed, show how
easy it is to release the gimble mounted driver by simply pressing the two spring arms
located on top of the driver to give a quick release of the mount. The gimble mount allows
operation on uneven floors with complete brush contact at all times for superior cleaning
results.