Specifications

1 General Overview
The SCV 24/26 is a powerful, close quarter, cleaning rider scrubber. This scrubber will turn
in a radius of 59", which allows the operator to clean even the tightest areas with ease. The
SCV 24/26 is available in disc or cylindrical scrub decks. The scrub decks are interchangeable
just by removing four bolts. This rider scrubber is equipped with either a 24" or 26" deck, and
will cover 30,000 to 35, 000 actual sq. ft. per hr. respectively, while the operator rides in complete
comfort. The SCV 24/26 is available with an optional off-aisle wand that will allow the operator
to clean even in the tightest areas.
3 Battery Compartment
2 Construction
4 Drive System
The SCV 24/26 is constructed with a rotationally molded polyethylene
solution/recovery tandk and a 1/8" x 2" x 4" structural steel tubing frame,
which is powder coated to resist corrosion. Explain how durable the
housing is where a standard steel frame normal has one wall, tubing has
multiple members for maximum strength.
Open up the battery compartment and point out the three, 12-volt, 210AH battery, 36 volt
system. This system will provide the customer with up to three hours of run time on a
single charge. The batteries sit in a polyethylene battery tray to prevent acid spills and to
protect the machine.
The double reduction 3/4 HP positive magnet double reduction drive motor is mounted
on the front wheel. The SCV 24/26 features a built in E-Mag brake for automatic braking
when the accelerator is released and a parking brake when the machine is in the off
position. The motor also propels the scrubber up to 3.5 miles per hour in the transport
mode. Explain that the front wheel is 3.5" x 10" non-marking and is double crosshatch
threaded for added traction. The rear wheels are 3.5" x 12" soft ride non-marking.