Owners manual

RPM1521E
45
A2 Reset to Default
If you forgot the password and/or the user name the RPM1521E can be reset back to the
factory default settings.
The reset button is located in the small hole next to the reset Red LED. Insert a pointed
object like a paper clip into this hole. Gently push and hold the reset button for at least
3-seconds, but less than 10-seconds, the Red LED will start flashing, and then release the
reset button.
DHCP will be enabled and the static IP address will be reset back to 192.168.1.10
The user name and password will be reset back to admin.
All of the other setting will be unchanged.
To clear all setting press and hold the reset button for more than 10-seconds, the Red LED
will turn on solid, and then release the reset button.