Owners manual

RPM1521E

Network Detect

Adaptor: Select the computer that will that receive the shutdown command.

IP: The IP address of computer that will that receive the shutdown command.

MAC: The MAC address of computer that will that receive the shutdown command.

Host Name: The host name of the computer that will receive the shutdown command.

RPM1521E Setup

RPM1521E IP: The IP address of the RPM1521E that will trigger the Shutdown Agent.

RPM1521E Port: The port used for the communication between the RPM1521E and the

computer with the Shutdown Agent. The default port is 22355.

Notification messages: A window will pop up to notify the user of the Shutdown Action.

Delay Time: The amount of time before the pop up window will open after receiving the

Shutdown command.

Run File: The user can create a batch file to run before the computer shuts down. The batch file

will be triggered once the Shutdown command from the RPM1521E has been received.

Delay Time: The amount of time before running the batch file.

Save Setting: Click on the "Save Settings" button to save all of the settings. The Setup menu

will close. The icon for the Shutdown Agent will be in the lower right-hand corner of the

taskbar.

NOTE: Once the installation and configuration of the Shutdown Agent is complete; open the

RPM1521E to configure the Safety Shutdown settings. See section 3-2-3 Safety Shutdown.