Owners manual

RPM1521E
29
3-4 Firewall Tab
3-4-1 IP Filter
This menu allows the administrator to configure the user’s privileges and prevent
unauthorized access to the RPM1521E through the network.
Enable IP Filter: Check the box to enable the IP filter.
Allowed IP Section: The first four sections are the beginning of the IP range. The last
section is the ending of the IP range, which the administrator has given specific rights to
certain users to access the RPM1521E. Example to authorize the IP ranges of
192.168.1.100 to 192.168.1.200, input 192.168.1.100 in the first four sections and then input
200 in the last section. If you only want to authorize one IP address, then input
192.168.1.100 in the first four sections and then input 100 in the last section. The default IP
address range is the IP address of the computer that you initially use to view the RPM1521E.
ADD: Click the ADD button to add this action.
Delete: To delete a specific IP address click on the “X”.
Save: Once the setup is complete click the Save button to save all of the changes.