Owners manual

RPM1521E

3-3-3 SMS Server

This menu allows the administrator to configure the SMS setting to send notifications once

an event has occurred.

SMS Test: This is used to verify that the SMS works properly.

Host: Enter the SMS server IP address or the host name.

Transmission Mode: Select the correct protocol based on your specific ISP to transmit the

SMS message.

Device Name: When an event occurs the RPM1521E will send an SMS notification. The

device name will identify the device.

Account: Enter the account name if required.

Password: Enter the password if required.

Message Format: The RPM1521E will auto load the following information username,

password, number, main host and message content based on the commands enter into

the message format box. Clicking on the icon to the right of the message format box

shows the options for the message format.

Save: Once the setup is complete click the Save button to save all of the changes.

NOTE: The SMS recipient’s cell phone number must be entered in the Account Tab. See

section ‘3-5 Account Tab’.