Owners manual

RPM1521E
24
3-3-2 Mail Server
This menu allows the administrator to configure the email setting to send notifications once
an event has occurred. The RPM1521E does support secure email (TLS) such as Gmail.
Email Test: This is used to verify that the email works properly.
Host: Enter the Hostname or IP address of the SMTP Mail Server that will be used to send
emails. If entering a Hostname, you are also required to enter the DNS Address.
Port: Enter the port number for the SMTP server. The default port is 25.
SMTP TLS secure connection: Check this box if using secure email.
From Address: This must be a legitimate email address.
Subject: When an event occurs the RPM1521E will send an email notification. The subject
line can be setup to easily identify that device.
Authorization: Check this box if the Mail Server requires authentication to send emails.
Username: Enter the account name if SMTP authentication is required.
Password: Enter the password if SMTP authentication is required.
Save: Once the setup is complete click the Save button to save all of the changes.
NOTE: The email recipient’s email address must be entered in the Account Tab. See section
‘3-5 Account Tab’.