Owners manual

RPM1521E
22
3-2-7 Copy
After configuring one of the outlets you can copy the same configuration to the other outlet.
3-2-8 Temperature
The RPM1521E has an optional External Temperature Probe and it also reports its internal
(Device) temperature.
Device Temp: Internal temperature of the RPM1521E.
External Temp: When External Temperature Probe is connected, it will display the
temperature.
High Alarm: When the external temperature exceeds this value, an alarm (email, SMS,
Trap) will occur. Only applies to the External Temperature Probe.
Low Alarm: When the external temperature is lower than this value, an alarm (email, SMS,
Trap) will occur. Only applies to the External Temperature Probe.
Offline Monitor: When Enabled, verifies the Temperature Probe is connected.
Probe state: External Temperature Probe has 3 states:
Monitor Normal: The “Offline Monitor” is checked. The external temperature is not
higher than the “High Alarm” setting or is not lower than the “Low Alarm” setting.
Monitor Alert: The “Offline Monitor” is checked. The external temperature is higher
than the “High Alarm” setting or is lower than the “Low Alarm” setting.
Monitor Off-line: The “Offline Monitor” is checked. The temperature probe is not
connected to the RPM.