Owners manual

RPM1521E
21
3-2-6 Peripheral
This tab is for setting up an action based on the temperature of the Device and/or the
External Temperature Probe.
Name: Add a command name. Clicking on the green plus sign next to the name will open
a pop up menu to enter the name.
Operation type: Choose the action for the specific output, Off, Reboot or Short on.
SNMP Trap name: The specify name of the alarm.
Monitor: Check to enable the commands and monitoring.
Monitor condition
Type: Use drop down list to select the Device Temperature or External Temperature.
Port: Select which Port of the RPM1521E to monitor and control.
Term: You may choose the terms of >, < or =.
Value: Set the temperature threshold to trigger the command.
Duration: Set the time for the RPM1521E to wait before issuing the command.
ADD: Click the ADD button to add this action.
Delete: Clicking the ‘X” icon will delete the command.