Owners manual

RPM1521E
19
3-2-2 Power
The Power tab allows the user to configure the power ON/OFF delay time.
Name: The users can assign a name to each individual outlet. This allows the system
administrator and/or manager to easily distinguish between the equipment that is
connected to the outlets.
Power On Delay: Each outlet can be programmed to startup at different time intervals
instead of both of them starting up at the same time.
Power Off Delay: Each outlet can be programmed to shutdown at different time intervals
instead of shutting both of them down at the same time.
Default: The default status of the each outlet can be configured.
Save: Once the setup is complete click the Save button to save all of the changes.
3-2-3 Safety Shutdown
This tab is for setting up the RPM1521E to send the shutdown command to the Shutdown
Agent software on the computer.
MAC: Enter the computer’s MAC address that you want to shutdown.
Delay Delivery: After delay delivery time, the WOL command will be sent to the computer
based on one of the Actions configured in Power Tab, Schedule Tab, or the Auto-Ping Tab.
Computer Name: Prior to the execution of safety shutdown, the
RPM1521EShutDownService-2020-windows-installer program must be installed on the
computer. Once in installed, select the computer to be shutdown from the drop-down list.
See Appendix A1 for Shutdown Agent Installation.