Owners manual

RPM1521E

11. Configure the System Timeout time and then click on the Next button. The system will

reboot to save all of the changes. Once the system is finished rebooting the Login

screen will open.

12. This completes the initial Setup-Procedure of the RPM1521E.

13. Now you are able to monitor and control the RPM1521E via a Web browser. See

Section 3 for the Web Operation.

Setup Procedure using the IP Search Utility program

1. The workstation and the RPM1521E must be in the same LAN to perform the

Setup-Procedure.

2. The Windows Firewall must be turned off to operate the IP Search Utility program.

3. From the Start menu select the Control Panel.

4. Select the Windows Firewall.

5. Select Off and then click the OK button.

6. Put the RPM1521E’s CD (provided) in the CD-ROM drive.

7. Launch the IP Search Utility program.