User`s manual

7
4.
Program the IP address. (See the SNMP-32 User’s Manual).
5.
Set RPM’s front control buttons for Internet ready. (See the Outlook section for
the correct operation)
6.
Use a browser to monitor and control the RPM.
7.
For NT shutdown setup, use the RJ11 to RS322 NT Server cable to connect with
server and use the following instruction to configure control panel /UPS in
Windows OS.
1. Open your Windows 2000 Control
Panel by clicking on “Start”, “Setting”,
“Control Panel”.
2. Double-click on the Control Panel’s
“Administrative Tools” icon.
3. Double-click the “Services” icon.
4. Double-click on the Uninterruptible
Power Supply service.