User`s manual

Receptacle Control Status LED (Green)

Receptacle Status LED (Red)

Active Module LED (Yellow)

Momentary switch for Receptacle

Master Power Switch

Receptacle Status LED (Red)

: When the LED is illuminated the receptacle is on and

providing AC Power. When the LED is off the receptacle is not providing AC Power.

Receptacle Control Status LED (Green):

When the control LED is illuminated, the

momentary switch is disabled and the output receptacle is set for remote control

(Internet Ready). When the Control LED is off, the momentary switch is active and the

receptacle may be turned on or off by pressing and releasing the momentary switch

(Local control mode). Pressing and holding the momentary switch for three seconds

(the Control LED will be flashing) will change the state from remote to local control.

NOTE: The Control Status LED must be on to be able to control the output

receptacles remotely.

Active Module LED (Yellow):

When illuminated this LED indicates which module or

client is currently being accessed via remote control.

Momentary switch for receptacle control

: Pressing and holding the momentary

switch for three seconds (the Control LED will be flashing) will change the state from

remote to local control. Pressing and holding the momentary switch for one second will

change the state from on to off or from off to on in the Local control mode.